How to Replace a Water Filter in a Keurig 2.0

Download Article

Download Article

The popular Keurig coffee machines brew cups of coffee by running water through single-serving plastic cartridges. Each Keurig contains a small charcoal filter, which purifies the water that ends up in your cup of coffee. These filters need to be changed about once every two months.^[1] To swap out the Keurig filter for a new one, you'll first need to open the top of the machine and remove the old filter. Soak the new filter before replacing it in the machine. If you have a Keurig model 2.0 (or later), be sure to set the electronic reminder for your next filter change.

1. 1

   Remove the top of the Keurig water reservoir. In most Keurig models, the water reservoir is located on the left-hand side of the machine. Fully removing the reservoir's top will give you access to the water filter.

   • You can change the filter if there is water in the reservoir, or if the reservoir is empty.

2. 2

   Pull out the filter unit. The handle portion of the upper filter holder will be sticking up in the water reservoir. Grasp the handle firmly, and pull it out of the reservoir.

   • The bottom of the filter-holder unit will be locked into plastic grooves on the bottom of the water reservoir. You may need to rock the filter-holder unit back in place or give it a sharp tug to remove it.
   • If you have a Classic series Keurig, your filter will be black with a circular timer on the end. If you have a K200 Plus, the filter will be clear and shorter, while the K300 and higher models have filters that are tall, thin, and clear.

3. 3

   Open the filter holder and discard the used filter. Use your thumb and index finger to pinch in the tabs at the bottom of the filter unit. Pull down to release the lower filter holder, then pull out the old filter.

   • The old filter can be thrown away in your kitchen trash can.

1. 1

   Purchase a new Keurig filter package. Keurig water filters are not sold individually, so you'll need to buy a set. They're commonly sold in groups of 6 or 12. You can find Keurig filters sold in the same stores that sell Keurig machines.^[2] Check any business or department stores that sell housewares, including Bed Bath and Beyond, Sears, Target, and larger grocery stores.

   • If you'd rather shop online, Keurig filters are sold through major retailers like Amazon and Walmart. Also check the websites of business that stock housewares.
   • Filter sets are relatively inexpensive. Depending on the number of individual filters in a package, the cost can range between $5 and $10.

2. 2

   Soak the filter in water for 5 to 10 minutes. Before you install the new filter in your Keurig and make the first cup of coffee, the filter needs to soak and absorb water. Fill a cup or bowl partway with water, and drop the filter in. Make sure that the filter is completely submerged while it's soaking.^[3]

   • The filter will float initially, but will have absorbed water and sunk to the bottom of the cup or bowl after 10 minutes.

3. 3

   Rinse the filter. For best results, rinse the filter off with tap water after it has finished soaking. Keep the tap water on a medium flow, and rinse the filter for a full 60 seconds.^[4]

4. 4

   Rinse the lower filter holder. The lower filter holder will have a thin mesh layer on its bottom side. Rinse this off with tap water to remove any dirt or impurities that may have built up during normal use.^[5]

   • Give the sides of the lower filter holder a quick rinse too.

5. 5

   Replace the filter in the filter-housing unit. Slide the new filter into the filter holder, with its rounded top-side facing up. Set the lower filter holder in place below it. The mesh bottom of the lower filter holder should cover up the flat bottom of the fabric filter. Snap the 2 sides of the filter holder in place around the filter.^[6]

6. 6

   Turn the replacement dial ahead 2 months. The replacement dial is located on top of the handle of the filter replacement unit. It's about the size of your thumb, and will list numbers 1–12 (each of which stands for the corresponding month). Twist the dial clockwise until the indicator points to the month 2 ahead of the current month.^[7]

   • So, if it's currently October (month 10), set the replacement dial to 12 (December).
   • The Keurig will use this setting to trigger its electronic reminder in 2 months. However, you need to set the reminder manually.

7. 7

   Set the Keurig to remind you about the next filter change. Your Keurig has a setting which enables it to alert you to change the water filter every 2 months. If you've correctly turned the replacement dial 2 months ahead, you can turn on the reminder through the electronic menu. Navigate to "Settings," and select "Water Filter Reminder." Select "Enable."

   • Based on the specific model and generation of your Keurig machine, its menu may slightly differ.
   • Older models (prior to Keurig 2.0) may not have the electronic reminder function.

8. 8

   Insert the water filter unit into the Keurig reservoir. Once you've reassembled the filter unit, put the unit back into the Keurig's water filter. The external side of the lower filter holder will snap into place when pressed down firmly into the bottom of the reservoir.^[8]

   • If the filter doesn't click into place, check to see that you've properly aligned the grooves on the bottom of the lower filter holder with the raised plastic on the floor of the Keurig's water reservoir.

Add New Question

• Question

  Does Keurig k50 have a water filter?

  

  This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Yes, it does have a water filter and you can purchase a Keurig Water Filter Starter Kit that is suitable for the Keurig K50 model.

• Question

  How often do you change the filter in a Keurig?

  

  This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  The Keurig company advises that the filters should be changed every two (2) months if the Keurig is being used every day. If you don't use it daily, then change the filter after 60 tank refills.

• Question

  Does the Keurig 2.0 come with a water filter?

  

  This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  You will need to purchase the Keurig 2.0 water filter starter kit as an accessory that's compatible with the Keurig 2.0. It will come with filter cartridges but after these have been used, you'll need to continue to purchase these separately.

• Question

  Do Keurigs have filters?

  

  This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Keurigs have filter starter kits that can be purchased as separate accessories and added to your model of Keurig. Just be sure to get a Keurig filter kit that matches your model of Keurig. Once the filters in the starter kit have been used up, you'll need to purchase new ones.

• Question

  Where can I find the water filter on my Keurig 425 Plus 2.0? There's no filter holder.

  

  You should have a clear plastic tower in the center of the water tank, that's your filter holder (unless someone threw it out and didn't want to keep buying filters, or filters the water separately). Wiggle the tower straight up and out, remove the bottom cap, and replace the old water filter brick tea bag. Keurig suggests that you replace the filter every 2 months.

• Question

  What is the orange-and-white plastic ball inside a Keurig for?

  

  To clean the input needle. Place it in the machine like a pod and then just come down several times to clean the input line needle.

• Question

  I cannot find the filter on my old Keurig machine, model number K40. What should I do?

  

  It's because they don't seem to sell it with this Keurig machine. It's a separate part that needs to be purchased.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

• It's recommended that you still change your Keurig filter every 2 months even if you only use spring or distilled water in the machine.^[9] The filter can still become clogged with impurities.

Thanks for submitting a tip for review!

About This Article

Article SummaryX

To replace the water filter in your Keurig, first place the new filter cartridge in a glass of clean water and let it soak for 5 minutes. Then, rinse the filter cartridge under running water for 1 minute. Separate the bottom plastic piece on your Keurig filter and rinse off the mesh. Next, place the new filter cartridge in the bottom piece. Reattach the bottom to the upper part of the filter. Finally, place the water filter into the empty water tank on your Keurig and press down until it locks into place. Change your Keurig water filter every two months. For more tips, including where to buy new Keurig filters, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 348,019 times.

Did this article help you?

How to Replace a Water Filter in a Keurig 2.0

Source: https://www.wikihow.com/Replace-a-Keurig-Water-Filter

Share this post